56
BRUSH DECK ADJUSTMENT
1. Put the machine on a level fl oor. Check when lowering the brush deck, the front of the
brush touches the fl oor, and the rear edge of the brush is 1/4 inch off the fl oor.
2. If the brush deck needs adjustment do as follows:
• Unscrew
the M8 screw
that locks the third point brush deck (right side of the machine).
• Lock the brush deck at the correct position.
• Tighten
the
M8 screw
.
3. Check the conditions of the
belt
. There is an automatic adjustment of the belt with a
spring.
4. Check the oil level of the gear reducers. Verify that the oil level reaches the
red point
in
the sight glass. Use oil type SHELL OMALA 460 or equivalent.
5. Check that if the brush deck is lifted up to the maximum height it does not hit the trac-
tion wheel motor. When it is lowered the brush touches the fl oor.
6. If the movement is incorrect do as follows:
• Lift up the brush deck verifying that the
levers
which lift it up do not hit the
assembly
frame
and the brush does not hit the
traction wheel motor
(while turning the steering
wheel completely to the left);
• If necessary unscrew the
nuts
on the tie bar and unscrew and adjust the forks until the
brush deck is at the right height. Tighten the nuts.
• Check that, when the brushes deck is lowered, the
end of travel micro switch
, stops the
brush deck when is down.
When the brush deck is totally up, the distance between a knob which secure the splash
guard and the fl oor is 6.6 to 7.0 inches.
BRAKE ADJUSTMENT
1. Check the functionality of brakes for parking and emergency use. If a new
adjustment is necessary do as follows:
• Screw the brake tie rod thimble in the
fork
so 2-3 threads go out.
• Locate the tie rod connector on its supports so 2-3 threads go out from the
external nuts
.
• Adjust
the
lock nut
so that the wheels do not interfere with the brake at the
same time.
• Tighten all the lock nuts.
2. Check that the brake pedal stroke stops at the second step and when you lock
the pedal it doesn’t unlock itself accidentally.
Summary of Contents for STEALTH DRS24BT
