BETCO STEALTH DRS24BT, Operator And Parts Manual

Page: 55 / 64

55
STEERING AND TRACTION ADJUSTMENT
1. Check the tension of the steering chain. If you have to adjust it do as follows:
• Unscrew
the front M8 screws which lock the castle wheel support.
• Unscrew the M8 nut on the lateral screw.
• Screw the lateral screw M8 on the castle wheel support so the front screws
can slide in their slot until the chain reach the correct tension.
• Tighten the nut on the lateral screw.
• Tighten the front screws to stop the castle wheel support at the right position
to prevent accidental movement.
2. If pinion and steering crown are not on the same plane use the screws clear-
ance to align them.
3. Check the traction chain tension. If it is necessary adjust it as follows:
• Unscrew
the M8 nut .
• Unscrew the M8 screw which locks the motor support.
• Screw or unscrew the M8 screw which regulate the chain tension to reach a
suitable condition.
• Tighten the M8 screw and tighten its nut.
• Be sure that the
M8 screw is tight.
SPEED REDUCTION SWITCH ADJUSTMENT
1. Check the functionality of the speed reduction micro switch. If necessary do
as follows:
• Unscrew the 2 cross head screws which lock the switch.
• In the slot move the micro switch so when the roller of the micro switch is
pushed the same has small clearance.
• Tighten the two cross head screws.
• Unscrew
the 2 M5 screws of the micro switch support.
• Check that, rotating the traction wheel, the micro switch activates at the same
angle turning the wheel on right and left. If this doesn’t happen move the
micro switch support in the slot on which it is mounted.
• Tighten the M5 screws of the micro switch support.