5
The rules must be followed to avoid injury to the operator or damage to the machine.
• Read the machine labels carefully. They must never be covered and must be replaced immediately if damaged.
• The machine must be used by trained and authorized personnel.
• The machine is not suitable for cleaning carpet.
• Do not mix different types of detergent to avoid the production of harmful gases.
• Do not rest containers of liquid on the machine.
• The machine must be stored at a temperature of between -10°F and +130°F. Do not store outside in damp conditions.
• Working conditions: room temperature between 33°F and 100°F with relative humidity of between 30 and 95%.
• Do not use in an explosive atmosphere.
• Do not use the machine as a means of transportation.
• Do not use acid solutions in the machine.
• Do not operate the brushes with the machine stationary to avoid damaging the fl oor.
• Do not collect fl ammable liquids.
• Do not use the machine to pick up hazardous dust or powder.
• In the event of fi re, use a powder type extinguisher. Do not use water.
• Do not use the machine on surfaces with a gradient greater than that indicated on the serial tag.
• When the machine is parked, remove the key and apply the parking brake.
• If you experience poor operation, perform standard maintenance. If operational problems remain, contact a
BETCO
techni-
cal service center.
• If parts need replacing, ask for
ORIGINAL
spare parts from an authorized
BETCO
dealer only.
• Before performing any maintenance on the machine, turn off the machine and disconnect the battery connector.
• Reconnect all electrical connections after performing any maintenance operations.
• Do not remove guards which can only be removed by using tools.
• Do not wash the machine with direct or pressurized water jets or corrosive substances.
• Every 200 hours of operation, have the machine maintained by a
BETCO
service center.
• Before using the machine, make sure all doors and covers are in position as described in this operator’s manual.
• Before lifting the recovery tank, empty the tank.
• Use only the brushes provided with the machine or those specifi ed in the operator’s manual.
• The machine must be disconnected from the power supply before removing the batteries.
• Before disposing the machine, remove the batteries.
• The machine should only be used by trained professionals.
GENERAL SAFETY REGULATIONS
Summary of Contents for STEALTH DRS24BT
