LaserSpeed 8000/9000 I/O Module Instruction Handbook
Operation
Part No. 93342 / Drawing No. 0921-01516
Page 66 of 84
Revision E (Dec 2013)
19 (msb)
20
21
22 (lsb)
2.2
2.3
Calibration Trim
32-bit unsigned integer
Calbiration Trim Factor Setting
Serial Command: "C"
23 (msb)
24
25
26 (lsb)
2.4
2.5
Analog Full Scale
32-bit unsigned integer
Analog Full Scale Setting
Serial Command: "D"
27 (msb)
28
29
30 (lsb)
2.6
2.7
Material Present
Dropout Time
32-bit unsigned integer
Material Present Dropout Time Setting
Serial Command: "F"
31 (msb)
32
33
34 (lsb)
2.8
2.9
Material Present
Validation Time
32-bit unsigned integer
Material Present Validation Time Setting
Serial Command: "G"
35 (msb)
36
37
38 (lsb)
2.10
2.11
Hour Meter
32-bit unsigned integer (Read Only)
Hour Meter - Indicates Hours of Operation
Serial Command: "H"
39 (msb)
40
41
42 (lsb)
2.12
2.13
High Speed Pulse
Resolution
32-bit unsigned integer
Pulses/Unit Length for High Speed Pulses
Serial Command: "L"
43 (msb)
44
45
46 (lsb)
2.14
2.15
Analog Zero Scale
32-bit unsigned integer
Analog Output Zero Scale (LS8000 Only)
Serial Command: "N"
47 (msb)
48
49
50 (lsb)
3.0
3.1
Low Speed Pulse
Resolution
32-bit unsigned integer
Pulses/Unit Length for Low Speed Pulses
Serial Command: "P"
51 (msb)
52
53
54 (lsb)
3.2
3.3
Calibration Number
32-bit unsigned integer (Read Only)
Calibration Number - Set at Factory
Serial Command: "TC"