LaserSpeed 8000/9000 I/O Module Instruction Handbook
Setup
Part No. 93342 / Drawing No. 0921-01516
Page 41 of 84
Revision E (Dec 2013)
~D
Test Mode
~D<CR>
Read Settings
Response Format:
Test
TestMode <A>
TestNumber <B>
Testonoff <C>
~D<A><CR>
Set Value
Factory Default: 0
Minimum: 0
Maximum: 2
Where
<A>
is the current test mode, and
<B>
and
<C>
are not used (should be
set to 0).
<A>
should be set to 0 for normal operation.
Mode
<A>
Description
0
Normal Operation
1
Cycle Front Panel Lights
2
Simulate Normal Operation
~F:IP
Ethernet IP Address
~F:IP<CR>
Read Setting
Response Format:
ABEtherNet IP <IP><CR>
~F:IP=<IP><CR>
Set Value
Factory Default: 192.168.1.111
Where
<IP>
is the IP address that the I/O Module will use for Ethernet
Communication.
This setting is only used when the I/O Module is equipped with an Ethernet
fieldbus card.
Example: To set the IP address to 192.10.1.100, send the command:
~F:IP=192.168.1.100<CR>