Bestway
®
Parts List
Important Ground Selection Information
P6315
P6169
P6317
P6319
P6313
P6314
P6318
P6316
Before assembling your pool, please take a few minutes to check all the parts and become familiar with the contents.
4
DESCRIPTION
Control Valve
O-ring
Control Valve Gasket
Connector Nut
Gasket
Connector
Debris Screen
Wrench
QUANTITY
2
2
2
2
2
2
2
1
PARTS NO.
P6313
P6314
P6315
P6316
P6317
P6318
P6319
P6169
• Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.
• Install a safety barrier that will eliminate access to the pool for young children and pets.
• Locate your pool near a drain area and a 110volt AC outlets protected by a GFCI (Ground Fault Circuit Interrupter)
• Locate your pool with a minimum of 122cm (4 feet) space on all sides so that a child cannot use an object to climb into the pool. Do not set up directly under
overhead power lines or trees and be sure the location does not contain underground utility pipes, lines or cables of any kind.
• It is essential the pool be set up on solid, level ground. If the pool is set up on uneven ground it can cause collapse of the pool and flooding, causing serious
personal injury and/or damage to personal property. Setting up on uneven ground will void the warranty and service claims.
• Sand should not be used to create a level base, the ground should be dug out if necessary.
• Do not set pool up on driveways, decks, platforms, gravel or asphalt. Ground should be firm enough to withstand the pressure of the water; mud, sand, soft / loose
soil or tar are not suitable.
• The ground must be cleared of all objects and debris including stones and twigs.
NOTE:
Lawn or other vegetation under the pool will die and may cause odors and slime, therefore we recommend removing all grass from where the pool will be
located. Avoid locating your pool over or beside areas prone to aggressive plant and weed species as they may grow through the ground cloth or liner.
• We highly recommend that once the pool is unfolded on the ground cloth to let it sit exposed to direct sunlight for 1 hour or more so that the pool is more flexible
during set up.
• Pump should be installed after pool is fully assembled. Remember to locate the intake and return outlets towards the outside power source.
• Pump should be connected to a grounding type receptacle protected by a GFCI (Ground Fault Circuit Interrupter). Do not plug into extension cords, timers or plug
adapters/converters. Locate cord so that it will not be damaged by lawn mowers, hedge trimmers or other cutting equipment.
• Pump and ladder have separate manual instructions. Please open them relative box for details.
• If you bought a separate ladder for your pool, make sure it matches the pool size.
• Regularly check to make sure the ladder is properly assembled.
Drawings not scaled to size.
Please see FAQ’S for additional information.
REF. NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
DESCRIPTION
Support
Wall Panel
Wall Panel A (for filter outlet)
Wall Panel B (for filter inlet)
Wall Panel C (for drain valve)
Warning Panel 1
Warning Panel 2
Warning Panel 3
Warning Panel 4
Link
Inner Vertical Panel
Outer Vertical Panel
M6 Bolts
Pool Liner (with drain valve)
Drain Valve Cap
Top Rail
Junction Cap
M10 Bolts
Bolt Cap
Hose Adaptor
Heavy-duty Repair Patch
QUANTITY
18
138 (1 extra)
1
1
1
1
1
1
1
75 (3 extra)
18
18
20 (2 extra)
1
1
18
18
38 (2 extra)
38 (2 extra)
1
4
PARTS NO.
P6292
P6293
P6294
P6295
P6296
P6297
P6298
P6299
P6300
P6301
P6302
P6303
P6304
P6305
P6306
P6307
P6308
P6309
P6310
P6324
P6312
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
S-S-000856
S-S-000856/21.0x28.5cm(#56191/C
版
) JS-YF-2009-B-01270/
英
