Outer Section Adjustment
The outer wing section of both spray booms includes a pressure relief valve plumbed into the
hydraulic lines near the wing fold cylinders. In the event this section of the wing contacts an
immovable object, the relief valve will allow hydraulic oil to bypass the cylinder, permitting the
wing tip to breakaway and fold rearward. To adjust the breakaway pressure:
1. Locate the pressure relief valve near the outer wing fold cylinders.
2. With an allen wrench,
remove the cap located on the
end of the valve cartridge to
access the adjustment screw.
Some hydraulic fluid may leak
from the valve, due to pressure
in the cylinder.
3. Using an allen wrench, turn the adjustment screw clockwise to increase the breakaway pres-
sure or counterclockwise to decrease the pressure. When making adjustments, it is suggested that
you start with a 1/4 rotation on the screw.
If the pressure relief valve is over tightened, the wing will
not break away when it contacts an immovable object. You
may also experience problems getting the boom to unfold completely, since the system
will be unable to push enough hydraulic oil over the pressure relief valve.
5. When finished, replace the cap on the end of the cartridge valve.
E7
IMPORTANT:
Adjust screw inside cartridge
Relief Valve Cartridge
Remove cap
Summary of Contents for Field-Pro IV 1200
