E13
5. Tighten vertical adjustment bolts so that top of axle stub is snug against the stops on the top
of the center axle tube. Do not torque these two bolts.
6. Tighten all clamping plate bolts. Torque these six bolts to 265#
7. Repeat the process on the opposite wheel, making sure the measurement is equal on both sides.
Preparation For Storage
1. Always store the sprayer inside a building if possible. This protects vulnerable components
like hoses, fittings, tires, valves and electronic relays from harmful ultraviolet rays, rain, snow and ice.
2. Thoroughly wash and flush the tank and plumbing system with a detergent solution; then
rinse with clean water. Be sure to dispose of all rinse in a safe and careful manner.
3. Clean all exterior surfaces of the sprayer using clean water and detergent.
4. Touch up all metal surfaces where paint has been scratched or damaged to prevent rust.
5. Lubricate and grease all lubrication points.
6. Hand wash all nozzles, strainers and check caps. Install new diaphragms in the check caps
and reinstall on the nozzle bodies.
7. Drain the foam marker tank by removing the strainer bowl. Clean and replace bowl.
8. Pour 10 to 15 gallons of non-toxic recreational vehicle (RV) antifreeze into the main tank
and rinse tank. Operate the sprayer until all hoses have been filled and RV antifreeze has begun to
spray out each of the spray nozzles before shutting off. Then make sure no RV antifreeze is leaking
from any fittings, hoses or nozzles.
9. Pour one gallon of RV antifreeze into the foam marker tank. Operate the foam marker for
two minutes per side on both sides of the wing.
Summary of Contents for Field-Pro IV 1200
