56
EN – Englisch
Technical information
Jungbrunnen 55-00 Mobil 100 V ~ 240 V alternative 24 V …
Height
410 mm
Width
340 mm
Depth
140 mm
Weight
approx. 13 kg
Supply voltage
see product label
Power requirement
see product label
Power consumption at 100 % output
70 W
Standby mode
< 1 W
Length of the connection cable
1.5 m
Pump – voltage
48 V
Fuse
6 A
Water flow pressure minimum
100 kPa (1.0 bar) at 2 l/min.
Water flow pressure maximum
700 kPa (7.0 bar)*
Water production in 24 hours
1,008 l**
Water production per minute
0.7 l**
Ultra-pure water – waste water ratio
1:2**
Untreated water requirement per minute
approx. 2 l**
Water connection
M22-/M24 adapter
* The flow pressure must amount to at least 100 kPa (1.0 bar) and
may not exceed 700 kPa (7.0 bar) of excess pressure. If it is higher
than 700 kPa (7.0 bar) excess pressure, a pressure reduction valve
must be installed.
** The consumption data may deviate from the values stated
depending on water pressure, water hardness, water inflow
temperature, room temperature, fluctuations in the mains voltage and
selected additional functions.
An angle valve with 3/4” screw
connection is required to connect.
Should such not be available,
please consult with an authorised
installer.
The BestWater system may not be
connected to a mains water line
with additional check valves.
