43
EN – Englisch
Installing the Jungbrunnen 55-00 Mobil
Electrical connection
12 V/230 V or 24 V/230 V
The BestWater system is also available
in the above combination. This is
equipped with an integrated plug for
DC input (12 V or 24 V, depending on
design) for the 110 to 240 V AC input.
For DC operation, the case is protected
by a safeguard integrated into the plug.
Two connecting cables, approx. 1.5 m
long, are included.
The mains plug must always be
accessible so that the BestWater system
can be disconnected from the mains
supply.
The connection may only occur through
an electrical unit / car board outlet desi-
gned in accordance with IEC60364.
The product label states the nominal
input and the corresponding protection.
Compare the info on the product label
with that of the electrical grid.
Electrical connection
Connect the BestWater system with the
connection cable provided.
Connect the BestWater system to the
12V or 24V electrical installation.
If the mains switch is flipped on, the
BestWater system is activated and
awaits initial operation.
Please only use the original
BestWater connection cable.
12–24 V, max. 16 A (for 12 V), max. 8 A (for 24 V). Compatible
with cigarette lighters and standard outlets.
a
) Mid contact
+
b
) Side contact
c
) 16-A fuse (for 12 V), 8-A fuse (for 24 V)
With red fixed sleeve (
d
) for usage in the cigarette lighter outlet.
Without red fixed sleeve (
d
) for usage in the standard outlet, in
accordance with DIN EN ISO 4165.
–
–
+
1
1
2
2
3
3
a
b
d
d
c
12V electrical installation
24V electrical installation
