48
EN – Englisch
Maintenance of the BestWater system
Maintenance & care
In order for your BestWater system to
work reliably and produce high-quality
water, the system must be regularly
maintained.
The general condition of the unit must
be assessed during maintenance, and
the following steps must be taken:
Assess the hose connections of your
BestWater system (the hoses must
be replaced if there are any tears or
kinks)
Assess the plug and crimp
connections (replace those with
damage and tears)
Oil the rubber seals
(replace porous seals)
Change the filter (as seen below)
Change the filter
The pre-filter is the precursor to
the membrane and gives it special
protection. It is thus necessary to
regularly switch out the filter unit.
This is also one of the warranty
conditions. Please adhere to the
defined time increments for changing
the filter. To change the pre- and post-
filter, use the image for assistance and
proceed as follows:
First please disconnect the
Jungbrunnen 55-00 Mobil from the
mains and cold water supply. Then you
may perform the
