- 8 -
♦
To insert an SD/SDHC memory card into the memory card slot of the device,
push it into the slot until it clicks into place.The contact surfaces of the memory
card must be facing towards the front of the camera.
♦
SD/SDHC memory cards have a locking system to prevent accidental erasure.
To protect the card from write access, slide the switch on the side of the card to
the "LOCK" position. However, the camera can only save data onto the card if
the switch is in the other position.
Handling and operation
In this chapter you will receive important information for the handling
and operation of the device.
Switching on and off, making settings
After connecting a power supply, move the operating mode selector switch to
the "SET" position to make the settings described on the following pages using
the control panel buttons :
Press the
button to switch from video to photo mode.
Press the
button to switch from photo to video mode.
Press the
MENU
button to open the settings menu. If you do not select an
option within two minutes, the menu will close automatically. Unconfirmed
changes will not be saved.