- 2 -
Cautions
Be sure the camera’s power is switched off before inserting or removing SD
card or batteries.
It is recommended to use new high-performance alkaline AA batteries or
rechargeable batteries, for prevent the liquid rot the battery depot.
Please make sure that the battery polarity matches that on the battery cover.
Make sure the polarities are correct.
In the
SET
mode, the camera will shut down automatically after two
minutes if no key is pressed, please turn on the power again if you want to
continue.
Please be sure that no power interrupt occurs during firmware upgrade,
otherwise the upgrade process could be interrupted incorrectly. If any fault
occurs after improper upgrading process and the camera stops function
properly, please return the device to the seller for repair.
When the power switch is
ON
, please don’t take out the SD card, battery
and remove the external DC power frequently.
When mount the product. In 3 meter region, avoiding temperature and
motion disturbances in front of device such as big leaf, strap and another
heat sources to prevent false triggering.
Avoiding temperature and motion disturbances in front of the device such as
a air-conditioner, air outlet of the chimney and other heat sources and
spotlight to prevent from false triggering.
Battery life will vary with operating temperature and the number of images
taken over time, typically, the trail camera will be able to capture several
thousand images before the batteries die.