Bestok 8210A User Manual Download Page 16

- 15 -

display.

If the currently selected recording is a video, press the

button to play back

the video. Press the button again to stop the video.If you press the

button,

the video will run backwards to the beginning.
If you now press the MENU button, the settings menu opens:

If you do not select an option within three minutes, the menu will close
automatically.

Press the

buttons to select the desired menu entry which you can then

activate with the OK button. Use the MENU button to navigate one menu level
backwards.

Delete selection

You can use this function to delete individual recordings from the memory card .
After you have called up this function, move the select bar to "Delete" and press
OK to delete the selected recording.

Delete all recordings

You can use this function to delete all recordings from the memory card.After
you have called up this function, move the select bar to "Delete" and press OK
to delete all recordings.

Activate slide show

This function can be used to play back the photos stored on the memory card
automatically. Each photo is shown for about 2 seconds. To stop the slide show
and keep the current image permanently on the screen, press the OK button.

Write protection

This function can be used to protect individual recordings or all saved recordings
from accidental deletion.

Showing recordings on an external monitor

Attach the jack plug of the supplied video cable to the TVout socket of the

Summary of Contents for 8210A





















Reviews: