- 10 -
Audio recording
If you want the camera to record sound when recording videos,select "On" here.
Interval
Use the
buttons to select the minimum time period that the camera
should wait before reacting to subsequent activation of the main sensor after
the initial recording. During the selected interval,the camera will not record any
images or videos. This prevents the memory card from being filled up with too
many recordings of the same event. You can select between 5–60 seconds or
1–60 minutes.
Side PIR
The two side motion sensors can be switched on or off here. If the side motion
sensors are affected by the sun or nearby branches,for example, select "Off ",
confirm with OK and thus deactivate the side motion sensors . The default
setting is "On".
Sense Level
The sensitivity of the main motion sensor is set here. For interior areas and
environments with little interference, such as branches blowing in the wind,
select "High". Select "Standard" for exterior areas and environments with a
normal amount of interference, and select "Low" for environments with a high
level of interference. The temperature can also affect the sensitivity. The "High"
setting is suitable for warm ambient temperatures, whereas "Low" should be
selected for cold Environments.
Timer
Select "On" if the camera should only be active during a certain time period. In
the screen menu that subsequently appears, you can then set the start and end
time for the active phase: