- 14 -
required light for making recordings possible. The LEDs emit light over a wide
angle. This makes it possible to make night recordings at a distance of about 3
m to 20 m without overexposing the subject. However, reflective objects such as
traffic signs can cause overexposure if they are located within the recording
range.Please note that night exposures are made in black and white.
Displaying recordings on the screen
To display recordings on the screen , the camera and the tree mounting should
not be connected to each other.
Slide the operating mode selector switch to the "SET" position. Now you will see
the live picture from the camera.Press the OK button to activate media playback.
The following appears on the display:
A: Shows that the selected recording is a video.
If this does not appear, the selected recording is a photo.
B: Battery charge level display
C: Shows the current recording number as well as the total number of
recordings.
D: Time recording was made
E: Date of the recording
F: Display of the photo resolution
G: Write protection status of the selected file
H: Indicator for type of SD card being used
You can use the
buttons to scroll through the recordings and view them on
the display .
Press the
button to zoom in on the image on the display. Press the
button
to zoom out again. Press the
or
button briefly to move the image section
up or down. Hold down the
or button to move the image section sideways.
If the image is zoomed, the corresponding zoom factor is also shown on the