Installation Instructions for Wi-Q Technology™ EXQ Exit Hardware Trim
2
BEST
a Product Group of dormakaba USA Inc.
❑
Battery bracket
❑
Door position
switch with
magnet
❑
Battery cover with
antenna
❑
Battery pack
❑
Battery cover screw
package
❑
Bar code ID sticker
(for your records)
❑
Cable ties, butt-
splices, and tape
❑
Installation
templates and
instructions
BEST ACCESS SYSTEMS
a
a Product Group of dormakaba USA Inc.
1
Introduction
These installation instructions describe how to install
your
BEST® Wi-Q Technology™ EXQ Series Exit Hardware T
rim.
Electronic Stand-Alone Exit Hardware Trim is availabl
e for
use with the following types of wide stile exit devi
ces
manufactured by Stanley-Precision Hardware (2000
Series) and Von Duprin® (98/99 Series):
Not all features are available for all exit device config
ura-
tions. The table below details what sensors are a
vailable
for which exit device configuration
s:
n
Contents
These instructions cover the following topics:
Planning the installation
................................................1
Preparing the door
..........................................................4
Installing the exit hardware and trim
............................8
Completing the installation
..........................................15
Device
DS a
a. Door position sensing
TS b
b. Request-to-exit (PHI touchbar monitoring)
LS c
c. Latch sensing
P
r
ecisio
n
Rim (2100)
Surface Vertical (2200)
Mortise (2300)
Wood Door Concealed (2700)
Concealed Vertical (2800)
Vo
n
D
u
p
r
i
n
Rim
Surface Vertical
Concealed Vertical
Site survey
Use the following survey to record information abou
t the
installation site and hardware applica
tion.
Exit hardware type:
Door handing and bevel:
Left-hand reverse bevel (LHRB)
Right-hand reverse bevel (RHRB)
Door type:
Door thickness: inches (1-3/4
″
to 2-1/4
″ )
Components checklist
Use the following checklist to make sure that you have the
items necessary to install your EXQ Exit Hardwar
e Trim.
rim
surface vertical rod
mortise
concealed vertical rod
Wood
Metal
Escutcheon and
lever assembly
Battery bracket
Installation Instructions for
Wi-Q Technology™ EXQ
Exit Hardware Trim
Tools required
Use the following checklist to make sure that you have the
tools necessary to install your EXQ Exit Hardware Trim.
For Precision® Hardware and Sargent installations
❑
1-3/8” dia hole saw (EV function only)
❑
1-1/8” dia hole saw
For Von Duprin® installations
❑
2” dia hole saw
❑
3/4” dia hole saw
For BEST® cylinders
❑
BEST ED211 cylinder wrench
For surface vertical exit devices
❑
Razor blade
❑
7-pin core (only
included if ordered
with trim)
❑
Cylinder mounting
sleeve (for Von
Duprin functions
only)
❑
Temporary
operator card
❑
Key cylinder and
keys (only included
if ordered with
trim).
❑
Electric drill (preferably corded)
❑
Straight edge
❑
Jigsaw
❑
Square
❑
Wire snips
❑
Pencil/marker
❑
Wire strippers
❑
7/16” dia drill bit
❑
Phillips screwdriver
❑
7/8” dia drill bit
❑
Measuring tape
❑
1” dia hole saw
BE
ST
Temporary
Operator
Rim cylinder
Mortise cylinder
OR