BEST
a Product Group of dormakaba USA Inc.
1
Introduction
These installation instructions describe how to install your
BEST® Wi-Q Technology™ EXQ Series Exit Hardware Trim.
Electronic Stand-Alone Exit Hardware Trim is available for
use with the following types of wide stile exit devices:
Precision® brand manufactured by
BEST
(2000 Series),
Von Duprin® (98/99 Series), and Sargent® (8800 Series).
Not all features are available for all exit device configura-
tions. The table below details what sensors are available
for which exit device configurations:
n
Device
DS
a
a. Door position sensing
TS
b
b. Request-to-exit (PHI touchbar monitoring)
LS
c
c. Latch sensing
Precision
Rim (2100)
■
■
■
Surface Vertical (2200)
■
■
■
Mortise (2300)
■
Wood Door Concealed (2700)
■
■
■
Concealed Vertical (2800)
■
■
■
Von Duprin
d
d. Von Duprin is a registered trademark of Von Duprin, Inc.
Rim
■
■
Surface Vertical
■
Concealed Vertical
■
Sargent
e
e. Sargent is a registered trademark of Sargent Mfg. Co.
Rim
f
f. Latch must have lift-type trim input (8863)
■
Contents
These instructions cover the following topics:
Planning the installation
................................................ 1
Preparing the door
.......................................................... 3
Installing the exit hardware and trim
........................... 7
Completing the installation
......................................... 16
Site survey
Use the following survey to record information about the
installation site and hardware application.
Exit hardware type:
Door handing and bevel:
❑
Left-hand reverse bevel (LHRB)
❑
Right-hand reverse bevel (RHRB)
Door type:
Door thickness:
inches (1-3/4
″
to 2-1/4
″ )
Components checklist
Use the following checklist to make sure that you have the
items necessary to install your EXQ Exit Hardware Trim.
❑
rim
❑
surface vertical rod
❑
mortise
❑
concealed vertical rod
❑
Wood
❑
Metal
❑
Escutcheon and
lever assembly
Installation Instructions for
Wi-Q Technology™ EXQ
Exit Hardware Trim
