background image

31

LIMITED WARRANTY

Transient Voltage Surge Suppression Circuitry

(For U.S. and Canadian Purchasers Only)

BEST POWER, a division of SPX Corporation (“BEST POWER”) hereby warrants the transient voltage surge suppression
circuitry in each FERRUPS®, FORTRESS®, PATRIOT®, UNITY/I

TM

, BEST 610, AXXIUM

TM

, CITADEL®, or SPIKE-

FREE

TM

product (hereinafter called “Product”) sold by it for installation in the United States of America and Canada to

be free from defects in material and workmanship under normal use and service for the lifetime of the Product, begin-
ning with the date of sale to the initial retail purchaser, subject to the following conditions.  This warranty is applicable
only to the initial retail purchaser (hereinafter called PURCHASER), is not transferable, and is limited to the following
remedies:

1. The replacement or repair of the transient voltage surge suppression circuitry in each Product that is returned intact

to BEST POWER and which shall appear to BEST POWER, upon inspection, to have been defective in material or
workmanship or to have been damaged through normal use;

2.  The reimbursement to the PURCHASER of up to $25,000 per occurrence of documented physical damage to

specified computer equipment connected to a Product where such damage could have been prevented by transient
voltage surge suppression circuitry as detailed in BEST POWER’s specification for the Product sold.

This warranty is made in addition to BEST POWER’s Limited Two Year Warranty.

This warranty does not include any taxes which may be due in connection with replacement or repair nor any installation,
transportation or postage costs.  These expenses will be paid by PURCHASER.  Replacement or repair will be made at
BEST POWER’s Worldwide Service, Highway 80, Necedah, Wisconsin 54646, U.S.A.

This warranty does not cover repair or replacement because of damage from unreasonable use (damage from road hazards,
accident, fire or other casualty, misuse, negligence, incorrect wiring) and any use or installation not in conformance with
instructions furnished by BEST POWER, or repairs or replacements needed because of modifications or parts not authorized
or supplied by BEST POWER.

This warranty is operable only upon the written acceptance by BEST POWER of an application by the PURCHASER on
BEST POWER’s standard form for the above warranty coverage for the Product sold.  In such application, the
PURCHASER shall represent that the Product sold has been properly installed and grounded in accordance with
instructions received from BEST POWER, and the PURCHASER shall also specify the computer equipment to which
the Product sold has been connected and the location of the computer equipment.  This warranty will not apply to any
equipment not specified in the application by the PURCHASER as protected equipment.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY AND BEST POWER’S LIMITED TWO YEAR
WARRANTY, BEST POWER MAKES NO OTHER WARRANTIES, AND TO THE EXTENT ALLOWED BY LAW,
BEST POWER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.

REMEDIES UNDER THIS WARRANTY ARE EXPRESSLY LIMITED TO THE REPAIR OR REPLACEMENT OF
PRODUCTS AND THE REIMBURSEMENT SPECIFIED ABOVE, AND TO THE EXTENT ALLOWED BY LAW
ANY CLAIMS FOR LOSS ARISING OUT OF THE FAILURE OF PRODUCTS TO PERFORM FOR ANY PERIOD
OF TIME, OR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR OTHER ECONOMIC
LOSS ARE EXPRESSLY EXCLUDED.

Some states do not allow limitations on how long an implied warranty lasts, so that the above limitation on duration of
implied warranties may not apply to you.  Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.  This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.  You are advised to consult applicable state laws.

Summary of Contents for B610


































Reviews: