DALIK
- Gateways
Programming manual
v1.4.3
www.besknx.c
z
14
3.5.2
Groups and scenes
3.5.2.1
Groups
A DALI light (EVG) can be a member of up to 16 different DALI groups. When a light is included in a group it can be controlled
individually or by group at any time. The DALI protocol also gives the possibility to save up to 16 different scenes or pre-sets
that can be memorized individually for each DALI light.
The information of group members and scenes is saved in each DALI ballast. It can be read and edited from the application
and it is automatically downloaded after downloading the application to the DALIK.
The DALI groups and scenes settings are sent automatically after programming the DALIK gateway. This operation
may take a few seconds depending on the size of the installation.
In the case of groups, the programmer can easily decide whether a ballast is member of a DALI group or not just by clicking
on the corresponding checkbox. If the group already exists, the DALI light will be included on it. If the group has not been
created yet the application will add it to the DALI tree automatically.
The DALIK programming application allows setting the groups configuration visually in an easy way with a lights-groups
matrix. Do click on DALI groups in the project tree to show it.