DALIK
- Gateways
Programming manual
v1.4.3
www.besknx.c
z
12
3.5
Off-line mode
This programming mode is thought for project design and configuration without any connection to the DALI installation. In
this case, the parameterization of the DALI ballasts it is supposed to be already done: addressing, groups assignment,
parameters definition like maximum and minimum values, dimming fade time, power on levels, etc. or any setting of the
internal DALI scenes.
The programmer has been provided of all this information and only needs to configure the gateway, setting how many DALI
lights or groups exist, and what addresses do they have. After that, the programmer work is only the assignment of the
communication objects to KNX group addresses.
The first time that the specific parameter dialog (plug-in) is executed it is started in off-line mode.