background image

82527 Vantage

20

2.13 HAND WASH TANK

Hygiene and comfort: the tank (1) of 20 litres of fresh 

water is for washing the hands or any part of the body 

(face, eyes,…) contaminated by the product.

The tap (3) is easily accessible by opening the door.
To wash the hands, open the tap (3) to a greater or 

lesser extent, depending on the desired flow.

WARNING:
The rinsing tank must MANDATORILY be 

filled with fresh water, under no pressure, 

via the plug (1) or under pressure via the 

"GARDENA" connection (2)

22-2

2.14 DRAINING THE TANK

The  draining  system  is  controlled  at  the  top  of  the 

machine's tank.

You must pull the handle after having removed the 

safety pin.

Recover the liquid coming out of the tank in a container 

adapted  to  the  management  of  phytosanitary 

residues.

NOTE:

On all the machines, a nut has been 

added under the tank, which must first be 

removed.

2.12 RINSING TANK

A tank (2) of 380 to 720 litres of fresh water enables 

the sprayer to be rinsed.

The rinsing tank (1) is placed in front of the main tank.
Its  filling  level  is  visible  from  the  tractor's  cab  via  a 

float gauge.

WARNING:
The rinsing tank must MANDATORILY 

be  filled  with  fresh  water,  under  no 

pressure, via the cover (1).

21

1

2

22-1

23-2

23-1

1

2

1

2

(1) valve closed - (2) valve open

3

Summary of Contents for VANTAGE E.C.TRONIC 28-30















































Reviews: