82527 Vantage
28
4.3 MIXING HOPPER
Function:
Enables the phytosanitary powders or
liquids to be mixed in while the sprayer is filled.
The mixing can be done in 3 different ways:
1 - Suction of liquid from the main tank.
2 - Suction of water from the rinsing tank.
3- External suction of water during filling.
In the last two cases, suction of freshwater has
several advantages:
It can rinse the accessories, packaging and the
hopper with fresh water.
It can clean the hopper circuit after its use.
540 rpm
Mixing with suction from the main tank
300 rpm
Mixing with suction from the rinsing tank
540 rpm
Mixing with external suction
Operation of the Berlogic valves:
3 possibilities:
Suction point
DUALMATIC
DUALELEC
Main tank
Rinse tank
External suction
Filling / Emptying the hopper:
Put the hopper in the
low position (A).
Open the cover.
Pour the phytosanitary product into the hopper.
Suction of the product:
▪ Close the cover.
▪ Open the incorporation valve putting the lever (2)
to position .
The product is sucked in and mixed into the sprayer's
tank.
Open valve (3) in position . This activates the
hopper's rinsing boom.
Rinsing the drums:
Position the product drum on the part (1).
Press on the drum to activate the cleaning nozzle (4).
Open the valve (2) position to suck the residue.
NOTE:
Close the valve (2) position
f
, as soon
as the hopper is empty to avoid producing
foam in the main tank.
44
44-2
Hopper rinsing:
press the push-button with the cover
closed to rinse the interior of the hopper (44-3)
Powder rinsing:
use the gun (1) to help to mix the
powder.
44-5
44-4
44-3
WARNING:
When mixing in powder, remove the
base plug (2).
(44-4, 44-5)
A
4
1
2
3
f
1
2
Summary of Contents for VANTAGE E.C.TRONIC 28-30
Page 45: ......
