44
sew&go 1 / 3 / 5
Twin needle
Stitch width dial
Stitch length dial
* The twin needle is an optional accessory and
is not supplied with your machine.
"
"
- Turn stitch length dial to the desired stitch
length.
- Pattern selector on "
" or
. Center
needle position.
- Make sure that the two threads used to
thread the twin needle are of the same weight.
You can use one or two colors.
- Insert the twin needle in the same way as
single needle. Flat side of needle should face
away from you.
- Insert the second spool pin on top of the
machine for the second thread. Follow
instructions for single needle threading.
Thread each needle separately.
Please note:
When sewing with twin needle, always proceed
slowly, and make sure to maintain low speed to
insure quality stitching. When using twin needle
on zigzag make sure the stitch width dial is set
between "0" and "3.0". Do not use twin needle
at setting above "3.0". (model sew&go 5)
No "S1" marking is shown on the stitch length
dial by model sew&go 1.
Use only twin needle assemblies with max. 2
mm needle distance. (i.e. bernette part number
502020.62.91)
Please Note:
