32
It is suggested that you always sew a test
buttonhole on a sample of your fabric. The
fabric should be stabilized especially when
sewing thin and stretch fabrics.
Using tailor's chalk, mark the position of the
buttonhole on the fabric.
Attach the buttonhole foot and set the stitch
selector dial to "
".
Set stitch length dial to "
". Set the stitch
width at "5". The width however may need to be
adjusted according to the project, sew a test
first to determine this.
1. Open the button plate and insert the button.
2. Lower the presser foot aligning the marks on
foot with the marks on the fabric. (The front
bar tack will be sewn first.)
3. Lower the buttonhole lever and gently push it
back. While lightly holding the upper thread,
start the machine.
4. Buttonhole stitching is done in the order.
Stop the machine when the buttonhole cycle
has completed.
5.
Making a Buttonhole
Use seam ripper and cut buttonhole open
from both ends towards the middle.
sew&go 5
Sew 1-step buttonholes
2
1
4
3
PUSH
Stitch width dial
Stitch length dial
3
2
1
4
5
