34
sew&go 1 / 3 / 5
Stitch width dial
Stitch length dial
Zippers
Set the machine as illustrated.
1. Place the right sides of the fabric together.
Sew a seam in the width of the seam
allowance from the right edge to the zipper
bottom stop position. Sew a few stitches in
reverse to lock. Increase the stitch length to
maximum, set the tension below 2, and
baste the remaining length of the fabric.
2. Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line. Baste
the zipper tape in place.
3. The zipper foot can be inserted right or left,
depending on which side of the foot you are
going to sew.
4. Stitch around the zipper on the right side of
the fabric, then remove the basting.
Please Note:
No "S1" marking is shown on the stitch length
dial by model sew&go 1.
5mm
Seam
allowance
Reverse
side
Reverse
stitches
Basting
stitching
Basting
stitching
Reverse
side
2
4
3
1
