35
sew&go 1 / 3 / 5
* The hemmer foot is an optional accessory and
is not supplied with your machine.
For hems in fine or sheer fabrics.
Set the machine as illustrated.
1. Neaten the edge of the fabric. At the
beginning of the hem, turn under the edge
twice by about 3mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly
towards the back. Insert the needle into the
fabric, raise the presser foot and guide the
fold into the scroll on the foot.
2. Gently pull the fabric edge towards you and
lower the presser foot. Begin sewing, guiding
the fabric into the scroll by holding it upright
and slightly to the left.
Please Note:
No "S1" marking is shown on the stitch length
dial by model sew&go 1.
Stitch width dial
Stitch length dial
1
2
Sewing with the hemmer foot
