39
sew&go 1 / 3 / 5
Darning
* The
is an optional
accessory and is not supplied with your
machine.
Set the machine as illustrated.
1. Install the darning plate.
2. Remove the presser foot clamp.
3. Attach the darning foot to the presser foot
holder. The lever (a) should be behind the
needle clamp screw (b). Press the darning
foot on firmly from behind with your index
finger and tighten the screw (c).
4. First sew round the edge of the hole (to
secure the threads). First row: Always work
from left to right. Turn work by 1/4 and
oversew.
A darning ring is recommended for easier
sewing and better results.
darning- / embroidery foot
Please Note:
No "S1" marking is shown on the stitch length
dial by model sew&go 1.
Stitch width dial
Stitch length dial
2
1
3
a
b
c
4
