sew&go 1 / 3 / 5
Inserting the needle
A
C
B
A
B
C
D
1
2
Attention:
Turn power switch to off ("O") before inserting or
removing the needle.
1. Change the needle regularly, especially if it is
showing signs of wear and causing problems.
Insert the needle as illustrated as follows:
A. Loosen the needle clamp screw and
tighten again after inserting the new
needle.
B. The flat side of the shaft should be
towards the back.
C/D.Insert the needle as far up as it will go.
2. Needles must be in perfect condition.
Problems can occur with:
A. Bent needles
B. Damaged points
C. Blunt needles
17
