Bernecker + Rainer 5PC820.SX01-00, User Manual, Page: 99 / 318

Commissioning • Connection examples
Section 3
Com
m
is
sio
ning
99 Automation PC 820 User's Manual V 1.20
3.5 One AP900 and one AP800 via SDL
One Automation Panel 900 and one Automation Panel 800 are connected to the integrated SDL
interface via SDL.
USB is supported up to a maximum distance (segment 1 + segment 2) of 30 m on the two
displays. Starting at a distance of 30 m, USB is only available on the first display (front and back)
up to a maximum of 40 m. USB devices can only be connected directly to the Automation Panel
900 or extension keyboard (without a hub).
3.5.1 Basic system requirements
The following table displays the possible combinations for the APC820 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in the following table (e.g. for
connecting a non-B&R Automation Panel 900 device).
Figure 34: Configuration - One AP900 and one AP800 via SDL
CPU board with system unit Restriction
Resolution
5PC820.SX01-00 5PC820.SX01-01
5PC800.B945-00 / -10
✓ ✓
Max. UXGA
5PC800.B945-01 / -11
✓ ✓
Max. UXGA
5PC800.B945-02 / -12
✓ ✓
Max. UXGA
5PC800.B945-03 / -13
✓ ✓
Max. UXGA
5PC800.B945-04 / -14
✓ ✓
Max. UXGA
Table 70: Possible combinations of system unit and CPU board
✓
✓
USB OK
0
Automation PC 820
SDL Segment 1
max. 40 m
Link: 5DLSDL.1000-01
SDVO-B
x
Internal APC panel number
SDL Segment 2
max. 40 m
Automation Panel 800
1
USB
possible
2 4
3
✓ ✓
Independent of segment length Dependent on segment length
Monitor / Panel
connection