Bernecker + Rainer 5PC820.SX01-00, User Manual, Page: 16 / 318

16
General information • Manual history
Automation PC 820 User's Manual V 1.20
1.10 2009-11-13 - System unit 5PC820.SX01-01 added.
- Section 5 "CompactFlash cards 5CFCRD.xxxx-04", on page 233 and Section 6 "CompactFlash
cards - 5CFCRD.xxxx-03", on page 238 updated.
- Section 5 "Known problems / issues", on page 107 in chapter 3 "Commissioning" added.
- Section 3 "Connection examples", on page 90 in chapter 3 "Commissioning" added.
- Section 4 "Connection of USB peripheral devices", on page 103 in chapter 3 "Commissioning"
added.
- Section 1.2.3 "Wall mounting", on page 83 in chapter 3 "Commissioning" added.
- Information about the Status LEDs was added to page 63 (power LED blinking).
- The section "Creating a bootable USB flash drive" removed.
- Section 2.2 "Firmware upgrade", on page 184 in chapter 4 "Software" added.
- Section 3 "B&R Automation Device Interface (ADI) development kit", on page 281 in "Appendix A"
added.
- Technical data for the replacement fan 8BXF001.0000-00 corrected on page 73.
- Section 8 "Cables", on page 247 in chapter 6 "Accessories" added.
- Images for the CAN plugs 0TB704.9 and 0TB704.91 corrected.
1.15 2009-12-03 - System unit weight for 5PC820.SX01-00 corrected.
- Section 1.6 "Installation guidelines Mounting orientation", on page 88 added
- Figure 1 "Configuration - Basic system", on page 29 corrected.
- Vibration and shock specifications for the system units changed.
- Information about the lifespan with and without the use of SRAM changed.
- Technical data for some SDL cables corrected and updated.
- SDL cable 5CASDL.0400-13 updated.
- Additional point added to section 5 "Known problems / issues", on page 107.
- Shock specifications were removed.
1.20 2010-08-20 - Chapter 5 "Standards and certifications", on page 207 updated.
- Section 6 "Automation PC 820 with Windows Embedded Standard 2009", on page 200 added
- B&R ID codes for system units added.
- B&R USB flash drive added to the chapter 6 "Accessories" on page 245.
- CPU boards 5PC800.B945-10, 5PC800.B945-11, 5PC800.B945-12, 5PC800.B945-13, and
5PC800.B945-14 added.
- Technical data "Remanent variables for AR (Automation Runtime) in Power Fail Mode".
added for the APC820 system units.
- Section 8 "Cables", on page 247 updated.
Version Date Change
Table 1: Manual history (cont.)