Bernecker + Rainer 5PC820.SX01-00, User Manual, Page: 267 / 318

Accessories • Cables
Section 6
Accessories
267 Automation PC 820 User's Manual V 1.20
8.5.5 Contents of delivery
8.5.6 Cable connection
The SDL flex cable with extender must be connected between the Industrial PC and Automation
Panel 900 display unit in the correct direction. The signal direction is indicated on the extender
unit for this purpose:
• Connect the end labeled "SDL IN" with the video output of the APC 820 (monitor/panel
output) or Panel OUT of an AP900 AP Link card.
• The "SDL OUT" end should be connected to the display unit (e.g. Automation Panel 900)
via the Automation Panel Link insert card (Panel IN).
Amount Component
1 SDL flex cable with extender in desired length, plug covers are attached at the cable ends.
Table 205: Contents of delivery - SDL flex cable with extender 5CASDL.0xx0-13
Figure 116: Example of signal direction for the SDL flex cable with extender - APC820
Figure 117: Example of signal direction display - SDL flex cable with extender
Automation PC 820
Automation Panel 900
SDL IN SDL OUT
SDL IN
SDL OUT
SDL OUT
SDL IN
SDL OUT
SDL IN
Automation Panel 900
Automation PC 820
Automation Panel 900
+
Automation Panel Link 5DLSDL.1000-01
SDL OUT SDL IN SDL OUT SDL IN
to
Panel IN to
Panel OUT