Bernecker + Rainer 5PC820.SX01-00, User Manual

Page: 153 / 318

Software • BIOS options
Section 4
Soft
w
are
153 Automation PC 820 User's Manual V 1.20
Legacy devices
Figure 64: 945GME - Legacy Devices
BIOS setting Meaning Setting options Effect
COM A Settings for the COM1 serial interface in
the system.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
COM B Settings for the COM2 serial interface in
the system.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM 2
port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
COM C Setting of the COM port for the touch
screen on the monitor/panel connector.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Table 101: 945GME - Legacy Devices - Setting options
Advanced
Legacy Devices Enable/Disable the
COM 1 port.
Base I/O address: [3F8]
Interrupt: [IRQ 4]
COM B: [Enabled]
Base I/O address: [2F8]
COM C: [ ]
Hardware Security Key
Interrupt: [IRQ 3]
Disabled
Select Item
Select Screen
: [Enabled] +- Change Option
Base I/O address [378] F1 General Help
F10 Save and Exit
ETH2 LAN controller: [Enabled] ESC Exit
COM A: [Enabled]
ETH2 MAC Address: 00:60:65:07:90:BC
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.