Bernecker + Rainer 5PC820.SX01-00, User Manual

Page: 185 / 318

Software • Upgrade information
Section 4
Soft
w
are
185 Automation PC 820 User's Manual V 1.20
Boot menu options:
1 . Upgrade MTCX (APC820) PX32 and FPGA
2 . Upgrade SDLR (AP800/AP900) on monitor/panel
2.1 . Upgrade SDLR on AP 0 (AP800/AP900)
2.2 . Upgrade SDLR on AP 1 (AP800/AP900)
2.3 . Upgrade SDLR on AP 2 (AP800/AP900)
2.4 . Upgrade SDLR on AP 3 (AP800/AP900)
2.5 . Upgrade all SDLR (AP800/AP900)
2.6 . Return to main menu
3 . Exit
Concerning point 1:
Automatically upgrade PX32 and FPGA for MTCX (default after 5 seconds).
Concerning point 2:
Submenu 1 is opened for upgrading the SDLR controller on the Monitor/Panel plug.
2.1 Upgrade SDLR on AP 0 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 0.
2.2 Upgrade SDLR on AP 1 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 1.
2.3 Upgrade SDLR on AP 2 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 2.
2.4 Upgrade SDLR on AP 3 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 3.
2.5 Upgrade all SDLR (AP800/AP900)
All SDLR controllers are automatically updated on all Automation Panels on the
Monitor/Panel (default after 5 sec).
2.6 Return to main menu
Returns to the main menu.
Concerning point 3:
Returns to the shell (MS-DOS).
Information:
The system must be powered off and on again after a successful upgrade.