28
Buttons description:
: or F1: these buttons allow you to come back to Valve status screen.
: allow you to go up in the AUX Cmd 1, AUX Cmd 2, Opening, Closing and Fail safe
position lists. This button is not sensitive so press F2.
: allows you to go down in the AUX Cmd 1, AUX Cmd 2, Opening, Closing and Fail
safe position lists. This button is not sensitive so press F3.
: this button allow you to refresh the page.
: or F4: these buttons allows you to validate the changes.
To change the valve reference and the tag number, or set up several torques, you have to press
the corresponding box and enter the appropriate value.
Note
: the reference displayed on the Valve selection screen is the valve reference: ‘MOV 002’ on
part 9.2 Configure your actuator.
To allocate the auxiliaries commands, to select a priority between opening and closing or to select
a fail-safe position you have to press the suitable box and select the parameter into the list. To go
up or down in the list you can use the Up and Down Arrow or use the scroll bar.
