8. DISMANTLING THE SLICING MACHINE
The machines are made up of:
- Aluminium alloy structure;
- Insertions and various in stainless steel;
- Electric parts and wires, etc.;
- Electric motor;
- Plastic materials, etc.
If disassembly and dismantling are to be carried out by
a third party, only consult firms that are authorised in
the demolition of the above mentioned materials.
If you carry out the dismantling yourself the materials
must be separated according to type and consult a
specialised firm for their disposal.
Always abide by the regulations in force in your country.
WARNING: In any case it is necessary to consult the
manufacturer or qualified personnel authorised by
the manufacturer for the removal of the circular blade
and subsequent removal of the cutting wire so that it
can be disposed of safely.
DO NOT ABANDON SCRAPS WHERE THERE IS FREE
ACCESS (THERE SHOULD BE BARRIERS AND SIGNS)
BECAUSE THIS CAN BE VERY DANGEROUS FOR
PEOPLE, SPECIALLY CHILDREN AND ANIMALS; THE
OWNER HAS SOLE RESPONSIBILITY.
P15 Series
8. DISMANTLING THE SLICING MACHINE
If disassembly and dismantling are to be carried out by
a third party, only consult firms that are authorised in
the demolition of the above mentioned materials.
If you carry out the dismantling yourself the materials
nd consult a
Always abide by the regulations in force in your country.
WARNING: In any case it is necessary to consult the
manufacturer or qualified personnel authorised by
the manufacturer for the removal of the circular blade
and subsequent removal of the cutting wire so that it
RAPS WHERE THERE IS FREE
ACCESS (THERE SHOULD BE BARRIERS AND SIGNS)
BECAUSE THIS CAN BE VERY DANGEROUS FOR
PEOPLE, SPECIALLY CHILDREN AND ANIMALS; THE
18
12-12-
User Manual
-07 UM – CodeF2 - Rev. 0.1
