6. USING THE SLICING MACHINE
6.1 LOADING THE GOODS
- Using the flywheel (1) bring the carriage (2) all
forward (towards the operator);
- Pull back the sliding overplate (3) completely (away from
the blade) using the handwheel (4) or the rapid advance
lever (5);
- Place the food to be sliced on the overplate and block
it with the food press (6) regulating the height as well;
- Regulate the thickness of the slice by pulling and
rotating the knob (7) at the same time, graduated from
0 to 8;
- Bring the overplate with the goods towards the blade
by using the rapid advance lever or the handwheel;
6.2 CUTTING THE GOODS
- Turn the flywheel clockwise (do not turn it counter
clockwise, this could seriously damage the machine);
- During the forward movement of the carriage (away
from the operator) the goods will go into the blade and
the slice, guided by the slice deflector, will fall onto the
plate below;
- During the return movement of the carriage (towards
the operator) the mechanical device which makes the
overplate advance transversally towards the blade will
be put into motion, its value pre-determined with the
slice thickness regulating knob.
P15 Series
Using the flywheel (1) bring the carriage (2) all
Pull back the sliding overplate (3) completely (away from
the blade) using the handwheel (4) or the rapid advance
Place the food to be sliced on the overplate and block
it with the food press (6) regulating the height as well;
ckness of the slice by pulling and
rotating the knob (7) at the same time, graduated from
Bring the overplate with the goods towards the blade
by using the rapid advance lever or the handwheel;
Turn the flywheel clockwise (do not turn it counter
clockwise, this could seriously damage the machine);
During the forward movement of the carriage (away
from the operator) the goods will go into the blade and
, will fall onto the
During the return movement of the carriage (towards
the operator) the mechanical device which makes the
overplate advance transversally towards the blade will
determined with the
14
12-12-
1
2
3
User Manual
-07 UM – CodeF2 - Rev. 0.1
4
5
6
7