7.3 LUBRICATING THE GUIDE BARS OF THE
CARRIAGE AND OVERPLATE
- After each cleaning operation of the machine put a few
drops of oil in the hole along the sliding bar (1) and on
regulating knob for slice thickness (2);
- Put a few drops of oil in the holes (3 and 4) ;
- Put a few drops of oil in the points (5 and 6)
- Put few drops of oil on the flywheel briefly and turn it (7)
Note: Only use white Vaseline oil. Do not use vegetable oils
P15 Series
7.3 LUBRICATING THE GUIDE BARS OF THE
After each cleaning operation of the machine put a few
1
drops of oil in the hole along the sliding bar (1) and on
Put a few drops of oil in the holes (3 and 4) ;
3
Put a few drops of oil in the points (5 and 6)
5
Put few drops of oil on the flywheel briefly and turn it (7)
Only use white Vaseline oil. Do not use vegetable oils
17
12-12-
User Manual
2
4
6
7
-07 UM – CodeF2 - Rev. 0.1
