6.3 CLEANING THE SLICING MACHINE
6.3.1 GENERAL INFORMATION
The machines must be properly cleaned at least once
a day, if necessary even more.
If the machines have not been used for a while they
must be cleaned before use as well.
WARNING: Danger of cutting!
Use protective gloves which are resistant to
cutting and tearing and concentrate on the job at
hand. PAY CAREFUL ATTENTION!
- Take out the container (1);
- Push the overplate forward and lift it with its food
press arm;
Clean all the disassembled parts, the machine body,
etc..only using hot water and a biodegradable foaming
detergent for dishes at a temperature of no lower than
+30 °C using a soft, spongy cloth and a nylon brush if
necessary for the plate and the sharp food press.
Rinse well with a lot of hot clean water only and dry
with a soft cloth or a spongy material.
P15 Series
6.3 CLEANING THE SLICING MACHINE
The machines must be properly cleaned at least once
If the machines have not been used for a while they
Use protective gloves which are resistant to
and tearing and concentrate on the job at
with its food
Clean all the disassembled parts, the machine body,
etc..only using hot water and a biodegradable foaming
detergent for dishes at a temperature of no lower than
+30 °C using a soft, spongy cloth and a nylon brush if
od press.
Rinse well with a lot of hot clean water only and dry
WARNING: DO NOT clean the machine with jets
of water or steam or similar.
15
12-12-
1
User Manual
WARNING: DO NOT clean the machine with jets
of water or steam or similar.
-07 UM – CodeF2 - Rev. 0.1
