From the “X” arm to the elevator arm use rods
50mm
long, making them
70mm
center to center or
77mm
end to end. This arm should also be exactly straight
up and down.
From the washout arms to the Flybar arms, use the rods
30mm
long, making
them
47mm
center to center or
54mm
end to end. The washout arms should
exactly horizontal.
From the swashplate to the bell/hiller mixer use
75mm
long rods, making
them
97mm
center to center or
104mm
end to end. For the linkages from the
seesaw to the bell mixer, you need to break out your x-acto knife and cut 4
ball links to make them
18mm
long.