Start off with the collective servo to triple bellcrank using the
30mm
rods,
making the linkages
51mm
from center to center or
58mm
from end to end.
These dimensions are appx; you may need one turn either way to get the setup
perfect, with the idea that both links are IDENTICAL in length. Note that the
Servo wheel balls AND the balls on the triple bellcrank are both straight up
and down.
The linkage from the triple AND single bellcrank on the opposite side to the
popsicle sticks use the
40mm
rod and are
70mm
long center to center or
77mm
end to end. Make sure the Popsicle sticks are exactly horizontal with power
on and collective at exactly half.
The aileron servo to aileron bellcrank rods uses the
85mm
rod and is
101mm
center to center or
108mm
end to end.