Translated user manual (EN-V11)
BENOMIC
36 / 43
Locking horizontal
Release the locking pin by pulling up the knob (Fig. 2). Hold the knob and pull out the stabilizer
arm to the maximum position (Fig. 3) Let loose the locking pin knob and be sure that the locking
pin is fixed in a locking hole (Fig. 4) If not so move the stabilizer arm until the pin is locked in a
locking hole near to the maximum position. Repeat this operation also for the other side.
Fig. 2. Release locking pin
Fig. 3.
Pull out the stabilizer arm
CLIK
Fig. 4. Locked
stabilizer arm
WRONG locked
GOOD locked
