Translated user manual (EN-V11)
BENOMIC
30 / 43
9.6
Charging the Batteries
Charge the batteries according to the status indication of the battery condition indicator
between 50 and 20% residual capacity and try to approach this advice as closely as
possible to the 20% residual capacity.
BATTERY CONDITION INDICATOR
The battery condition indicator provides information about the battery. The battery is full when
all the leds are lit - the fewer leds lit up, the lower the state of charge. The leds are coloured
green, orange and red. The battery is full (80 - 100%) when the red, orange and green leds are
lit - it is half full (40 - 70%) when the orange and red leds are lit - the battery is completely
discharged (20 - 30%) when only the red leds are lit. When the red leds is indicate work the
whole day true and recharged at the end of the day! If a acoustic signal gives by repeat 2
signals stop immediately and charge the
BENOMIC.
Switch OFF the
BENOMIC
with the key
switch before connection the charger. The charge process should by continuous until the
charger shows the indication "end of charge cycle". (after 12 hours or more!) Reed the manual
of the charger.
Avoid charging to early (battery condition indicator is in the 50 - 100% area) unnecessary
charging affects the capacity and life of the batteries!
Try to charge always when the battery condition indicator is in the 20% area this has the
following benefits:
Less charge cycles is beneficial for the battery life time
Less battery water consumption
Less energy consumption
Charge the batteries at least once every month using a suitable charger, regardless the
level of usage! Ensure that the batteries are not completely flat before recharging!
See also the instructions of Appendix 3 safety data sheet battery!
