Translated user manual (EN-V11)
BENOMIC
37 / 43
Locking vertical
Release the locking pin by puling up the knob (Fig. 5). Move the vertical post downwards until it
reach the ground. Let loose the locking pin knob and be sure that the locking pin is fixed in a
locking hole. Repeat this operation also for the other side!
Turn both hand wheels so that the post is going downwards to the ground (Fig. 6), there should
be no movement in the middle of the stabilizer construction after the described action. The limit
switch should be switched now and working safely at height is now possible (Fig. 7).
Fig. 5. Locking pin vertical Fig. 6. Hand wheel
Fig. 7. Ready to use
The Benomic is unable to drive when the stabilizer is forced to the ground!
Make ready for driving
Make all the above steps the opposite way to make the Benomic ready to drive. Be sure that the
stabilizer post and arms are maximum inside and locked to provide unintended sliding out of the
stabilizer parts.
