Translated user manual (EN-V11)
BENOMIC
19 / 43
7.4
Alignment warnings system
The
BENOMIC
is fitted with an alignment indicator with an acoustic warning signal. The
alignment indicator provides an acoustic signal when the trolley is out of alignment in excess of
2
. When this occurs all activities must be
stopped immediately
, the
scissor
brought
down
as
far as possible - exit the platform then take the
BENOMIC
back
while walking next to the trolley.
The pipe rail system must be reset before the activities can be resumed. First of all test the
prepared section of rails with the scissor set at the lowest position and at the slowest speed. If
this does not indicate a problem, try it once again with the scissor raised but still at the slowest
speed. Resume activities if the problem no longer persists.
Try to find a good, long term solution to improve track alignment!
7.5
Stabilizers
The Benomic 3-scissors and 4-scissors must be carried out with stabilizers if the working height
is higher than 3,5 meters. It is important that the stability is ensured in order to be able to work
on height. It is not allowed to work at height if the surface is gives not sufficient bearing
capacity. For a description of the soil bearing capacity we reference to the Dutch health and
safety catalog in force in the Netherlands.
See for the operation of the stabilizers appendix 2!
