Translated user manual (EN-V11)
BENOMIC
35 / 43
Appendix 2: Operation of the stabilizers
The Benomic 3-scissors and 4-scissors must be carried out with stabilizers if the working height
is higher than 3,5 meters. It is important that the stability is ensured in order to be able to. It is
not allowed to work at height if the surface is gives not sufficient bearing capacity. For a
description of the soil bearing capacity we reference to the policy regulation according to the
health and safety catalog in force in the Netherlands.
Fig. 1. Summary stabilizers
Drive to the place where you want to work at height and put the direction switch (6) to the
neutral position and put also the speed regulator button (7) to zero. Leaf the platform at the
lowest position to activate the stabilizers.
Hand wheel
Locking pin vertical
Locking pin horizontal
Limit switch adjust bolt
