Translated user manual (EN-V11)
BENOMIC
38 / 43
Appendix 3: Safety data sheet battery
Battery advice
The next chapter provides advice for efficient use, safety and maintenance.
Efficient use of the pipe rail trolley and battery
The following instructions are intended to promote. Efficient use of the pipe rail trolley and the
useful life of the batteries.
Basic principles:
• At high speeds, the battery are faster empty.
• A lot of starts and stops giving higher consumption.
• By using the pipe rail trolley the residual capacity and battery voltage drops slowly, the power
consumption increases. As a result, there is more heat in engine, speed control when the
batteries become more empty.
• Worn rollers or screwed rope and rusty chain (bad maintenance) results in a higher
consumption. (See instructions for servicing our site:
http://www.berghortimotive.com/service/bsa-film)
• The (too) deep discharge batteries shortens the lifespan.
• Timely loading and proper maintenance will prolong the life of the batteries.
• Timely loading reduces heat generation in motor and speed controller and battery charger.
Efficient use:
• Limit travel speed as well as possible at the pace of work (potentiometer).
• By following the above recommendations will also increase employee productivity.
Safe use of batteries
Below you can find recommendation for the use and maintenance of batteries.
WARNING!
-
An explosive gas is given off the batteries while being charged - no sparks, and naked
flames and smoking are strictly forbidden
-
Charging should be carried out in a well ventilated space and only using a suitable
battery charger!
-
The battery electrolyte levels should be checked every month! The battery electrolyte
level should be 1cm above the plates
-
Top up only with distilled (demineralised) water - wear protective gloves!
-
Always fill the batteries after charging and never fill above the marker in the hole of the
battery cell. (See also the instruction sheet traction batteries)
