4
GENERAL
1 general safety inforMation
b
Check that the product is complete, undamaged and
as ordered as soon as you receive it. Report any di-
screpancies or damage to the
B
dealer who sold
it.
b
This product must be installed by a legally qualified
heating engineer. On completion of the installation,
the installer must issue the owner with a declaration
of conformity confirming that the installation has been
completed to the highest standards in compliance
with the instructions provided by
B
in this in-
struction manual, and that it conforms to all appli-
cable laws and standards.
b
This product must only be used for the purpose
for which it is designed and made, as specified by
B
.
B
declines all responsibility, contractual or
other, for damage to property or injury to persons or
animals caused by improper installation, adjustment,
maintenance or use.
b
The product must be serviced at least once a year.
Servicing must be arranged in advance with the
B
Technical Assistance Centre.
b
All servicing and repairs must be performed by a
qualified heating engineer.
b
If water leaks from the storage cylinder, turn off the
water supply and contact
B
’s Technical Assistan-
ce Centre or a qualified heating engineer immedia-
tely.
b
If the storage cylinder is not going to be used for an
extended period of time, contact
B
’s Technical
Assistance Centre to have at least the following ope-
rations performed:
-Close the shut-off cocks for the domestic hot water
circuit.
-Shut down the boiler connected to the storage cylin-
der as instructed in its own manual.
-Switch the storage cylinder OFF at the control panel
(if fitted) and at the mains power switch.
-Drain the central heating circuit and domestic hot
water circuit if there is any risk of freezing.
b
This instruction manual is an integral part of the pro-
duct. It must be kept safe and must ALWAYS accom-
pany the product, even if it is sold to another owner or
transferred to another user or to another installation.
If you lose this manual, order a replacement imme-
diately.
2 PrecaUtions
The operation of any appliance that uses electrical power
demands that a number of fundamental safety precautions
be respected. In particular:
a
Never attempt to install the system without using sui-
table personal protection equipment and without fol-
lowing all applicable occupational safety standards.
a
Do not touch the storage cylinder when barefoot or
wet if it has any electrical accessories connected to
it.
a
Never clean or service the storage cylinder without
first turning the mains power switch OFF to discon-
nect all electrical accessories (if fitted) from the mains
electricity supply.
a
Never pull, disconnect, or twist any electrical cables
coming from the appliance even if it is disconnected
from the mains electricity supply.
a
Do not expose the storage cylinder to the elements. It
is not designed for use outdoors.
a
If the pressure in the solar collector circuit drops, do
not top up with water alone, since this increases the
risk of damage from freezing.
a
Do not use connections or safety devices or fittings
(expansion vessels, pipes, insulation) that are not
specifically designed and tested for use in solar wa-
ter heating systems.
a
Do not allow children or infirm persons to operate the
system unsupervised.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children, since
it can become a potential hazard. Dispose of packa-
ging material in compliance with applicable legisla-
tion.
General
Summary of Contents for IDRA DS 1000
Page 1: ...solar storage cylinder IDRA DS INSTALLATION MANUAL USER MANUAL SOLAR ...
Page 22: ...22 END USER ...
Page 23: ...23 END USER ...
