background image

20

TECHNICAL ASSISTANCE CENTRE

19  recycling and disPosal

At the end of its useful working life, do not abandon the storage cylinder in the environment, but dispose of it through the 

proper channels in accordance with applicable legislation.

20  troUblesHooting

SUPPLEMENTARY HEATING CIRCUIT

FAULT

CAUSE

SOLUTION

The storage cylinder functions 

incorrectly or irregularly.

Flow rate too high.

 -Fit a pressure limiter.

 -Fit a flow reducer.

There are blockages or deposits in the 

domestic hot water circuit.

 -Check and clean as necessary.

The pump is malfunctioning.

 -Check the pump.

The water temperature from the boiler 

is too low.

 -Check the temperature setting.

There is air in the primary circuit.

 -Bleed the circuit.

SOLAR COLLECTOR CIRCUIT

FAULT

CAUSE

SOLUTION

The storage cylinder functions 

incorrectly or irregularly.

There is air in the circuit.

 -Bleed the circuit.

The flow rate is too low or too high.

 -Check the flow rate of the collector 

circuit.

Pressure is too low.

 -Check that circuit pressure is ap-

proximately 3 bar when cold.

There is lime scale or sludge in the 

cylinder.

 -Check and clean as necessary.

The storage cylinder loses a lot of 

heat overnight.

There is natural circulation to the 

collectors.

 -Make sure that the non-return valve is 

efficient and closes properly. Repla-

ce if necessary.

Summary of Contents for IDRA DS 1000

























Reviews: