Beretta 20141085, Installation Manual

Page: 23 / 112

23
b
Do not remove the cardboard packaging until your reach the
installation location.
b
Before handling the appliance and removing the packaging,
wear PPE and use tools suitable for the appliance's size and
weight.
b
This step must be carried out by several individuals equipped
with suitable means with respect to the appliance's size. Make
sure that the load is not unbalanced during handling.
Proceed as follows to remove the packing:
- Remove the straps (1) that fix the packaging to the pallet
- Remove the box (2)
- Remove the protective bag (3)
2
3
1
1
a
Do not dispose of packaging material into the environment, or
leave it within the reach of children, since it can become a po-
tential hazard. Dispose of packaging material in compliance
with applicable legislation.
To remove the module from the pallet proceed as follows:
- Unscrew the screws (4) of the four stops (5) that fix the feet (6)
- To separate the pallet (7) from the module insert it as shown in
the figure (always pushing from the front).
5
7
5
4
6
5
5
Once the module is positioned, level it by using the appropriate ad-
justments of the feet with a 14-key, as shown in the figure.